Trim + Tire Dressing and Shine
Trim+Tire is the answer in the fight against faded rubber, plastic and vinyl. Trim+tire is a solvent based dressing that lays down smooth and produces a rich and long lasting protective coating on all exterior surfaces. Apply a thin and even layer to the surface and watch as Trim+Tire restores exterior trim and tires for weeks, not days. Get your trim back. Get Trim+Tire
For Best Results:
- Rinse thoroughly and dry before use
- Scrub tires and/or exterior trim well with Wheel Clean and a wheel brush or microfiber towel
- Apply thin even layer of Trim+Tire to surface with clean microfiber towel or applicator pad
- Allow to dry at least 5 minutes. For wet shine do not wipe off product. For a matte finish wipe off product after dry time.
*Caution* - Always test product in inconspicuous area before application!
Best to store out of direct sunlight n a controlled temperature of approximately 60 degrees Fahrenheit. Product can be affected by bacteria and oxygen levels, it’s important to always have the lid on tightly and secure.
Warning! Use only in a well ventilated area. Wear protective gloves and eyewear. Wash hands after handling. Avoid breathing dust, fumes, gas, mist, vapors & spray. Keep away from heat, sparks, and/or open flame. If swallowed, do not induce vomiting. Contact a physician immediately! May Cause eye irritation, when in contact with eyes flush with plenty of water. May cause skin irritation, when in contact with skin wash with plenty of soap and water. May cause respiratory irritation, If inhaled, move to fresh air. Close container when not in use. Always keep out of reach of children. In case of chemical emergency call Chemtrec. 1(800)-424-9300